Cases

Home > Cases > SHANGHAI TECTFILM MATERIALS CO., LTD. Latest company case about How to Safely Remove TECPPF Paint Protection Film

Events

news

Cases

info@tectfilm.com

Contact Now

How to Safely Remove TECPPF Paint Protection Film

2022-03-02

1. Cut the film surface into strips 10 to 15 cm wide each with a knife.The length can follow the length of the sheet metal surface.

2. Use hot water or steam to heat the film. (The water heated on the film surface is controlled at about 80 degrees). When the film is peeled off, the temperature of the film surface is controlled at about 45 to 65, and the film and the paint surface form an angle of 30 degrees or 45 degrees.

3.Then peel off the film from the edge, and then pull the peeled film back.The height between the film and the paint must be less than 30 degrees.

latest company case about How to Safely Remove TECPPF Paint Protection Film 0

Tips: Wrong angle and no heating or excessive heating will cause the film to peel off the glue.The installation liquid containing alcohol or the flushing liquid containing alcohol will cause the film to peel off during the construction.

Send your inquiry directly to us